Cabling
Sound Engineer
I think the return box is on its last legs. It’s very noisy. I had to run IeMs from the console, fixed the problem. Maybe just needs replaced at this point. Equipment ID : Return Box
Cabling
Sound Engineer
Dodgy 13 amp plug. It’s the only black one we have so would be good to get fixed soonish. Equipment ID : 13 amp
Cabling
16 amp cable (DJ to stage Source)
16 amp cable (from DJ desk to stage source) failed. We ran another cable to source. Equipment ID : N/A
Cabling
Faulty NL4 Cable
Long NL4 faulty. Missing top end when noise tested. Marked with blue tape on the connections. Separated and placed in the amps room. Equipment ID : Long NL4
Cabling
Damaged NL4 loom
The NL4 loom has another damaged line, this time the #1. There’s a noticeable crack just off one of the pins. On the wedge it means there’s a loss of low and mid range. Equipment ID : 4-way NL4 loom
Cabling
FS orange car 5 drum
Signal cuts in and out for example chases will stop for a few seconds and start again, I’m sure lee had an ld in using it recently and it was fine but Matthew the visuals guy had that problem so we ran his drum in and it was fine. Equipment Read more…
Cabling
Broken Neutrik
Broken NL4 on blue speaker cable used for listening wedge. Equipment ID : None
