Cabling
Sound
A few NL4s needing looked at I left one in the amp room has no locking clip on the connector and the 4 way loom only has two working ends (1 & 4 not passing audio) Equipment ID : NL4 Read more…
Fixtures
Source4 Bulb Blown
Hi I think the centre Source4 has blown its bulb and needs a replacement, if there is any. Had a look but couldn’t find one. Equipment ID : Centre Source4
Lighting
Blinder Cell Not Working
Not sure if it’s been reported yet but the CSL Molefay SR cell is not working on it. Equipment ID : Molefay
Consoles
FOH desk Fader 17
Fader 17 (first of master section) suddenly became unresponsive today. It was on my drum vca, and read -14db despite the physical fader still being at unity. I had to select the vca and turn it back up on the Read more…
Sound
Q1 LF error
System check flagged up an error in the LF of a Q1. See attached photo. Equipment ID : Q1 2-3
Sound
Sound
Module 2 dropped out on the desk briefly so I power cycled it, then module 4 dropped out, I noticed the rear of the desk was extremely hot so I switched it off for 20 mins and put a fan Read more…
Sound
Mon Return Box – channel 4 is 6dB quieter than rest
Per title, channel 4 is 6dB quieter than the rest of the return channels. Equipment ID : ?
Sound
Stage Box – no phantom on channel 6
I have taped the XLR end of channel 6 on the relevant stage box to indicated no phantom. It may also not deliver any signal, but didn’t get a chance to test this. Equipment ID : ?
Sound
AVID Mons desk laggy
Per title, mons desk is laggy. All touch screen interactions, typing, adjusting GEQ, etc takes a second to happen. Metering also lagging. Equipment ID : N/a
Sound
Main hang q10
Main hang left q10 was farting at us, so we have just unplugged it for now. Equipment ID : FOH L Q10
Consoles
LR Avo Desk Issues
Yesterday during sound check, the Avo Sapphire started to have some small issues – the palette windows were dimmed and the touch screen displays were not refreshing. However you could still select and use the palette windows and operate the Read more…
Sound
Warehouse sound computer failing to boot up
Just an update from Saturday night. The Warehouse sound computer failed to boot up when I turned it on. I tried a few times turning it on and off but always got a blank screen after entering the passcode pin. Read more…
Other
Broke Co2 hose
On Saturday night before the gig I changed the Co2 canister over for the hazer in the Liquid Room and noticed there was a leak coming from the small Co2 hose that connects to the hazer. The leak appears to Read more…
Consoles
FoH Monitor damaged
Monitor for controlling amp via R1 is damaged. Backlight is really bright at the bottom of the monitor, and really dark at both bottom corners. Equipment ID : ?
Sound
CDJ jog Wheel
The CDJ (right hand side one) the techno belters lads brought back was all working when I tested it. But the Broke DJ, Matt mentioned to me that night that the jog wheel on it felt loser than the other Read more…
Lighting
Clay Paky Fault
The outer USL Clay Paky B -Eye Wash stopped outputting during the gig on the 08/08/2023. Seemed like the same issue as previously mentioned. Equipment ID : Outer USL Clay Paky B-Eye Wash
Lighting
Lampy
The Pea Super from the main room up stairs cut out and wouldnt turn back on at 1am on sunday morning tried swapping the power outlet and everything for it but still wouldn’t turn on think it may be an Read more…
Cabling
FS orange car 5 drum
Signal cuts in and out for example chases will stop for a few seconds and start again, I’m sure lee had an ld in using it recently and it was fine but Matthew the visuals guy had that problem so Read more…
Dimmers
Warehouse art2000 issue
At the end of the night on Saturday 3rd December I could not get any response out of the avo art2000 when I tried to turn it off. I.e I could not lower the level to 0 on the memory Read more…
Fixtures
Quantum Lost Power
DSR quantum 01 lost power during heriot watt rehearsals. Didn’t trip breaker, cross plugged it with a working fixture but still did not power up. Equipment ID : Quantum 01
Sound
Mons Desk Channel Buttons Dented
Coloured channel buttons dented/slanted on chn 13 & 14 on mon desk. Observed on 19.11.22 upon arrival. Equipment ID : ?
Fixtures
WH Fixtures
Spike 1, 3 and 5 from stage right to left lost all tilt functions on saturday night, this has happened on multiple occasions they start off okay sometimes and then just die after about 40 minutes or less and there Read more…