Sound
Sound Engineer
J-Sub 2R is out. Can very easily hear the audio difference. Needs calibrated. Equipment ID : J Sub 2R
Sound
Sound Engineer
Engine CMOS batter running critically low. Checked the back of the engine and the status looks fine… But worth checking. Equipment ID : Avid S6L
Sound
Sound Engineer
Engine CMOS batter running critically low. Checked the back of the engine and the status looks fine… But worth checking. Equipment ID : Avid S6L
Cabling
Sound Engineer
I think the return box is on its last legs. It’s very noisy. I had to run IeMs from the console, fixed the problem. Maybe just needs replaced at this point. Equipment ID : Return Box
Microphones
Faulty SM58 Beta
One of the SM58 Betas failed to pass sound during ABBA’s sound check. Marked with white tape in the amps room. Equipment ID : SM58 Beta – LQ gig kit
Cabling
Sound Engineer
Dodgy 13 amp plug. It’s the only black one we have so would be good to get fixed soonish. Equipment ID : 13 amp
Cabling
16 amp cable (DJ to stage Source)
16 amp cable (from DJ desk to stage source) failed. We ran another cable to source. Equipment ID : N/A
Cabling
Faulty NL4 Cable
Long NL4 faulty. Missing top end when noise tested. Marked with blue tape on the connections. Separated and placed in the amps room. Equipment ID : Long NL4
Cabling
Damaged NL4 loom
The NL4 loom has another damaged line, this time the #1. There’s a noticeable crack just off one of the pins. On the wedge it means there’s a loss of low and mid range. Equipment ID : 4-way NL4 loom
Speakers
Sound Engineer
Fairly sure there is a problem with the input on one of the m4s. It sounds odd, not like a tweeter is gone but just odd, tried the same NL4 with a different cable and it was fine. It’s in the amp room Equipment ID : M4
Sources
Sound Engineer
Send 4 on the analog return multi appears to be faulty. Tried multiple XLR from the same output and it has happened on multiple different gigs so it has to be that. I’ve taped it up. Equipment ID : Analog Return Box
Consoles
FOH desk Fader 17
Fader 17 (first of master section) suddenly became unresponsive today. It was on my drum vca, and read -14db despite the physical fader still being at unity. I had to select the vca and turn it back up on the flex channel, and then got an error message on the Read more…
Sound
Q1 LF error
System check flagged up an error in the LF of a Q1. See attached photo. Equipment ID : Q1 2-3
Sound
Sound
Module 2 dropped out on the desk briefly so I power cycled it, then module 4 dropped out, I noticed the rear of the desk was extremely hot so I switched it off for 20 mins and put a fan on the rear and seemed to solve the issue for Read more…
Sound
Mon Return Box – channel 4 is 6dB quieter than rest
Per title, channel 4 is 6dB quieter than the rest of the return channels. Equipment ID : ?
Sound
Stage Box – no phantom on channel 6
I have taped the XLR end of channel 6 on the relevant stage box to indicated no phantom. It may also not deliver any signal, but didn’t get a chance to test this. Equipment ID : ?
Sound
AVID Mons desk laggy
Per title, mons desk is laggy. All touch screen interactions, typing, adjusting GEQ, etc takes a second to happen. Metering also lagging. Equipment ID : N/a
Sound
Main hang q10
Main hang left q10 was farting at us, so we have just unplugged it for now. Equipment ID : FOH L Q10
Consoles
LR Avo Desk Issues
Yesterday during sound check, the Avo Sapphire started to have some small issues – the palette windows were dimmed and the touch screen displays were not refreshing. However you could still select and use the palette windows and operate the desk. I decided to shutdown and restart the desk. When Read more…